Point of sale
Connect a Dejavoo terminal to Wi-Fi
Stratamize lists the Wi-Fi steps for Dejavoo Android and Z-line terminals, taken from Dejavoo’s guides and two provider help centers.
About two minutes. Our team follows up.

Before you start
Check the network first
Most failed connections are about the network, not the terminal. Dejavoo’s Wi-Fi guide for the Z line opens with three requirements, and they are worth checking on any terminal before you type a password.
- The network uses WPA2 security
- The router supports 2.4 GHz
- The network name has no special characters, such as * - @ # !
We did not find a published band requirement for the QD and P lines, so treat the 2.4 GHz point as confirmed for the Z line only.
If the terminal is integrated with register software through SPIn, one provider’s guide adds that the terminal and the register have to be on the same Wi-Fi network.
QD and P terminals
Android terminals
The path depends on the payment software. Dejavoo’s guide for QD and P Series models using iPOSpays software goes through the payment app:
- Tap the Settings icon
- Tap COMM SETUP
- Choose the network type, then your network
On AURA builds, two provider help centers send you to the Android settings instead. Both end at the same screen: tap WLAN, tap your network name, type the password and tap Connect. The network then shows as connected.
They differ on how to reach Settings. One taps a Settings icon at the top left of the home screen. The other opens the Core Menu with the manager password, taps the round home button and then the Settings gear, and reopens the payment app when it is done. If neither matches your screen, your provider has the path for your build.
Z-line terminals
Keypad and touch screen models
Dejavoo publishes one Wi-Fi guide for the whole Z line. On a touch screen you tap each word. On a keypad model each step is a number key, and the guide lists them.
- Open the Core Menu
- UTILITY, then COMMUNICATIONS
- LOCAL PARMS, then WiFi
- SCAN NETWORK
- CONFIGURE, then SET PASSWORD
- Go back and choose CONNECT
- Wait for the idle prompt
One provider’s keypad guide uses a shorter route: F1, then Comm Status, then Wifi. It adds that the 0 key cycles through special characters when you type the password, and that the terminal is connected when it shows an IP address that is not all zeros.
Did it work?
How to tell the terminal is connected
Dejavoo’s quick reference guides give one sign to watch: the Wi-Fi icon blinks when the terminal is not connected and stays steady when it is.
A steady icon means the terminal has joined the network. It does not prove the terminal can reach the payment host. Print a report or run one small sale before the lunch rush, and void the sale afterward if it was only a test.
The other option
When a cable is the better answer
A countertop terminal that never leaves the counter does not have to be on Wi-Fi. Ethernet is one of the choices in COMM SETUP on the iPOSpays software. One provider’s guide for keypad Z models has you plug the cable into the LAN port, then check it under F1, Comm Status, ETH.
A cable takes the Wi-Fi password, the band and the signal off the list of things that can go wrong. The trade-off is that the terminal stays where the jack is. Handhelds and pay-at-the-table setups need Wi-Fi or a cellular plan, and that is a question for your provider.
Still offline
If it still will not connect
- Type the password again, slowly, and check the capitals
- Check the router against the three points above
- Move the terminal next to the router and try once. If it connects there, the problem is signal, not settings
- Ask your provider whether anything in the terminal file has to change for Wi-Fi
The iPOSpays software also has a REMOTE DIAGNOSIS option under the Support icon. It opens a remote session for the support team. Use it only with support staff you called yourself.
A second look
Provider not helping?
Stratamize is an independent merchant services agent. If the company that set up your terminal is not answering, we can review the setup with you and tell you what to ask for. Changes to an existing terminal file still have to come from the provider on that account.
If you would rather move, you apply for a merchant account in your own business name through one of our banking partners, subject to approval, and we program the terminal with you.
Does a Dejavoo terminal work on 5 GHz Wi-Fi?
Dejavoo’s Wi-Fi guide for the Z line says the router must support 2.4 GHz. We did not find a published band requirement for the QD and P lines, so ask your provider before you change your router.
Why does the Wi-Fi icon keep blinking?
Dejavoo’s guides say the icon blinks when the terminal is not connected. Check the password and the network requirements, then try again.
Why can’t I find COMM SETUP or WLAN on my terminal?
The menus depend on the payment software and on how your provider built the terminal file. Your provider has the path for your build.
Can I use Ethernet instead of Wi-Fi?
On terminals with an Ethernet port, yes. It is one of the network choices on the iPOSpays software, and the Z-line guides include it.
Sources
Where these facts come from.
- Dejavoo, Z Line: Setting Up Wi-Fi Connection, checked 2026-11-20
- Dejavoo, Quick Reference Guide for QD and P Series Android models using iPOSpays software (copy hosted by GETTRX), checked 2026-11-20
- Dejavoo, Quick Reference Guide, EMV Retail, Android terminals with AURA (copy hosted by Paystri), checked 2026-11-20
- Dejavoo, Quick Reference Guide, EMV Retail, touch screen Z-Line Z9 and Z11 (copy hosted by GETTRX), checked 2026-11-20
- Stax Payments help center, Connecting to Wi-Fi, checked 2026-11-20
- Stax Payments, Quick Reference Guide for non touch screen Z models, checked 2026-11-20
- Kodaris documentation, Dejavoo Q Series terminal: connect to Wi-Fi, checked 2026-11-20
Point of sale
Tell us how your terminal connects today.
We recommend the setup, quote it and set it up with you.
Every merchant account is subject to underwriting approval.
Ask about Dejavoo by email